Please see below for full instructions on how to change the saddle on your Wattbike AtomX.
Tools required
5mm Allen key
1. Using the 5mm Allen key, loosen the bolt on the right-hand side of the saddle clamp until the rails of the saddle can be removed.
2. Twist the clamp anti-clockwise to help release the seat rails.
3. Reverse the process to fit a replacement saddle.
Note: the Allen key bolt will need to be tightened enough to prevent the saddle tipping. This should be 13-15Nm.
This Wattbike is currently only available for commercial use. For purchase enquiries, please contact:
NovoFit
Website: https://novofit.com.au/
Email: info@novofit.com.au
Tel: 03 8766 0420 / 0414 316131
Comments
0 comments
Article is closed for comments.